DRIVER SERVO WECON VD5L-010SA1P
Driver Servo Wecon VD5L-010SA1P thuộc dòng Series VD5L thường dùng trong công nghiệp chế tạo máy
| Sản phẩm | Driver Servo Wecon VD5L Series |
| Mã sản phẩm | VD5L-010SA1P |
| Encoder | 17 bit absolute |
| Dòng định mức | 10A |
| Motor tương thích | Sử dụng được cho motor 0.2 KW |
Chi Tiết Mã Hàng
Thông Số Kỹ Thuật
| Type | Voltage and Current |
| VD5L-003SA1P | Input voltage: 220V, Maximum output current: 3A |
| VD5L-010SA1P | Input voltage: 220V, Maximum output current: 10A |
| VD5L-014SA1P | Input voltage: 220V, Maximum output current: 14A |
| VD5L-015SA1P | Input voltage: 220V, Maximum output current: 15A |
| Specifications | VD5L | ||
| Basic Specifications | Power supply | 220V | |
| Control method | IGBT PWM control sine wave current drive | ||
| Encoder | 17bit, 23bit absolute value encoder | ||
| Control signal input | 4DI, Select the input function according to the function code configuration | ||
| Control signal output | 3DO, Select the output function according to the function code configuration | ||
| Communication | Host computer communication | The Type-C interface can be used to set function code parameters, monitor status, view waveforms, and perform parameter self-tuning, etc. via a computer host. | |
| Braking resistor | Internal braking resistor(also support external braking resistor) | ||
| General functions | Auto-tuning | Automatic load inertia identification, automatic rigidity self-tuning (SCTool) | |
| Waveform monitoring | Monitor real-time speed/torque/position(SCTool) | ||
| Waveform recording | Waveform acquisition frequency 1K Hz,10s waveform data recording | ||
| Parameter management | Support batch parameter import and export; Support SDO modification | ||
| Vibration suppression | Support mechanical vibration suppression | ||
| Protection | Overvoltage, undervoltage, overcurrent, overspeed, overload, overheating, encoder failure, excessive position deviation, torque limit, speed limit, etc. | ||
| Brake device | Support brake signal output | ||
| DI function | Error/alarm clear(A-CLR), Forward rotation prohibited(POT)Backward rotation prohibited(NOT), Emergencystop(E-STOP) | ||
| DO function | Servo ready(RDY)、Error signal(ALM), Alarm signal(WARN), Rotation detection(TGON) Zero speed signal(ZSP), Torque limited(T-LIMIT), Velocity limited(V-LIMIT) Servo start(SRV-ST), Servo brake output(BRK-OFF), Communication VDO |
||
| EtherCAT related | EtherCAT related | Communication protocol | EtherCAT protocol |
| Support services | CoE(PDO,SDO) | ||
| Sync mode | DC-Distributed Clock | ||
| Physical layer | 100BASE-TX | ||
| Baud rate | 100 Mbit/s(100Base-TX) | ||
| Duplex mode | Full duplex | ||
| Topology | Circular, linear | ||
| Transmission medium | Shielded Category 5e or better network cable | ||
| Transmission distance | Less than 100M between two nodes (good environment, good cables) | ||
| Frame length | 44 bytes to 1498 bytes | ||
| Excessive data | Maximum size of a single Ethernet frame is 1486 bytes | ||
| Sync jitter | <1μs | ||
| Distributed clock | 64 bit | ||
| EEPROM capacity | 8k bit initialization data is written through the EtherCAT master station | ||
| Control mode and performance | Control mode | CSP、HM、CSV、CST、PT | |
| Sync period | 125μs | ||
Kích Thước Sản Phẩm
Be the first to review “VD5L-010SA1P”
Related products
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.