DRIVER SERVO WECON VD2F-014SA1P

Driver Servo Wecon VD2F-014SA1P thuộc dòng Series VD2F thường dùng trong công nghiệp chế tạo máy

Sản phẩm	Driver Servo Wecon VD2 Series
Mã sản phẩm	VD2F-014SA1P
Encoder	17,23 bit absolute
Dòng định mức	14A
Motor tương thích	Sử dụng được cho motor 0.75 KW

Chi Tiết Mã Hàng

Motor Model	Drive Model	Specifications
		Rate torque (N.m)	Rate Speed (RPM)	Kw	Flange
WD40M-01030S-A1F	VD2F-003SA1P	0.318	3000	0.1	40
WD60M-02030S-A1F	VD2F-010SA1P	0.64	3000	0.2	60
WD60M-02030S-A1F-L	VD2F-010SA1P	0.64	3000	0.2	60
WD60M-04030S-A1F	VD2F-010SA1P	1.27	3000	0.4	60
WD60M-04030S-A1F-L	VD2F-010SA1P	1.27	3000	0.4	60
WD80M-07530S-A1F	VD2F-014SA1P	2.39	3000	0.75	80
WD80M-07530S-A1F-L	VD2F-014SA1P	2.39	3000	0.75	80
WD80M-10030S-A1F	VD2F-014SA1P	3.18	3000	1	80
WE80M-11030S-A1F ☆	VD2F-014SA1P	3.5	3000	1.1	80
WE80M-10025S-A1F	VD2F-014SA1P	4	2500	1	80
WE80M-12030S-A1F ☆	VD2F-014SA1P	4	3000	1.2	80
WE110M-12030S-A1F ☆	VD2F-014SA1P	4	3000	1.2	110
WE110M-15030S-A1F ☆	VD2F-014SA1P	5	3000	1.5	110
WE130M-10025S-A1F ☆	VD2F-014SA1P	4	2500	1	130
WE130M-13025S-A1F ☆	VD2F-014SA1P	5	2500	1.3	130
WE130M-15025S-A1F ☆	VD2F-014SA1P	6	2500	1.5	130

 

 

Thông Số Kỹ Thuật

Item			VD2F Series
Basic Specifications	Control Method		IGBT PWM controlled sine wave current drive
	Encoder		17 bit, 23 bit absolute encoder
	Input Signal		4*DI
	Output Signal		4*DO
	Analog Signal Input		—
	Pulse Signal Input		Open collector or differential input
	Pulse Feedback Output		Z signal open collector output
	Internal Instructions		Support 8 internal speed commands and internal multi-segment position commands
	Communication / Debug		Support to communicate with modbus device or debug with SCTools
	Braking Resistor		750W built-in baking resistor; 400W without built-in baking resistor;
			both support external braking resistor
Function Setting	General Function	Self-tuning	SCTools supports self-turning function,and identifies load inertia identification and rigidity level, and other parameters.
		Waveform Monitoring	View position, speed, torque and other curves on PC in real time
		Waveform Storage	The original waveform data could be stored for up to 10s
		Parameter Import / Export	Support batch parameter import and export;
			support PLC configurate servo parameters automatically (supported by some models)
		Vibration Suppression	Suppress mechanical vibration by setting vibration suppression parameters
		Protective Function	Overvoltage, undervoltage, overcurrent, overspeed, overload, overheating, encoder failure, excessive position deviation, torque limit, speed limit, etc
		Brake	Support
		Universal Control DI	Servo enable (SON), fault and warning clear (A-CLR), forward drive prohibition (POT), reverse drive prohibition (NOT), command reverse (C-SIGN), emergency stop (E-STOP), Gain switching (GAIN-SEL), Multi-speed command selection(INSPD1、INSPD2、INSPD3)；Internal multi-position command selection and enable（POS1,POS2, POS3,POS4, POSEN）
		Universal Control DO	Servo ready (RDY), fault signal (ALM), warning signal (WARN), rotation detection (TGON), zero speed signal (ZSP), torque limit (T-LIMIT), speed limit (V-LIMIT),servo on state output (SRV-ST), servo brake output（BRK-OFF）；Z signal input
	Pulse Input	Pulse Frequency	Maximum 500khz
		Pulse Type	Pulse + Direction, Orthogonal coding
		Pulse Filtering	First-order low-pass filter or smooth filter
		Pulse Output	—
	Speed Mode	Command Input	Only internal speed command is supported (Maximum 8)
		Zero Clamp	Motor speed could be clamped to zero via the setting of zero clamp function
		Torque Limit	Support to set the torque limit
	Torque Mode	Command Input	Only internal torque command is supported
		Torque Reaching	Torque reaching threshold and DO can be set flexibly
		Speed Limit	The speed limit can be set flexibly

 

Kích Thước Sản Phẩm