ENC-1-1-T-24

Bộ mã hõa vòng Quay ENC-1-1-T-24 Autonics, xuất xứ Hàn Quốc, bảo hành 12 tháng, hàng chính hãng

Thông Tin Sản Phẩm

Tên sản phẩm	Encoder bánh xe
Mã sản phẩm	ENC-1-1-T-24
Tần số đáp ứng tối đa	180kHz
Độ phân giải cho phép tối đa	5000rpm
Pha ngõ ra	A,B
Đường kính bánh xe	250mm
Tỷ lệ bánh răng	1:1
Số xung	250
Đơn vị đo tối thiểu	1mm
Ngõ ra điều khiển	Totem pole
Nguồn cấp	12-24VDC  ±5%(sóng P-P: max. 5%)
Loại kết nối	Loại cáp trục
Cấu trúc bảo vệ	IP50
Tiêu chuẩn	CE
Môi trường_Nhiệt độ xung quanh	-10 đến 70℃, bảo quản: -25 đến 85℃
Môi trường_Độ ẩm xung quanh	35 đến 85%RH, bảo quản: 35 đến 90%RH
Trọng lượng	Xấp xỉ 494g

Cách chọn Encoder

Thông Số Kỹ Thuật

Item			Wheel Type Incremental Rotary Encoder
Resolution (PPR)※1			1mm/pulse, 1cm/pulse, 1m/pulse, 0.01yd/pulse, 0.1yd/pulse, 1yd/pulse
Electrical specification	Output phase		A, B phase
	Phase difference of output		Phase difference between A and B : T/4 ± T/8 (T=1cycle of A phase)
	Control output	Totem pole output	• [Low] – Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ • [High] – Load current: max. 10mA, output voltage (power voltage 5VDCᜡ): min. (power voltage-2.0)VDCᜡ, output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ
		NPN open collector output	Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ
		Voltage output	Load current: max. 10mA, residual voltage: max. 0.4VDCᜡ
		Line driver output	• [Low] – Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ • [High] – Load current: max. 10mA, output voltage (power voltage 5VDCᜡ): min. (power voltage-2.0)VDCᜡ, output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ
	Response time (rise/fall)	Totem pole output	Max. 1㎲ (cable length: 2m, I sink = 20mA)
		NPN open collector output
		Voltage output
	Max. response frequency		180kHz
	Power supply		• 5VDCᜡ ±5% (ripple P-P: max. 5%) • 12-24VDCᜡ ±5% (ripple P-P: max. 5%)
	Current consumption		Max. 80mA (disconnection of the load)
	Insulation resistance		Over 100MΩ (at 500VDC megger between all terminals and case)
	Dielectric strength		750VAC 50/60Hz for 1 minute (between all terminals and case)
	Connection		Axial cable type, Axial cable connector type
Machenical specification	Starting torque		Depend on coefficient of friction
	Moment of inertia		5,000rpm
Vibration			1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock			Approx. max. 75G
Environment		Ambient temperature	-10 to 70℃ (at non-freezing status), storage: -25 to 85℃
		Ambient humidity	35 to 85%RH, storage: 35 to 90%RH
Cable		Axial cable type	Ø5mm, 4-wire, 2m, Shield cable (AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
		Axial cable connector type	Ø5mm, 5-wire, 250mm, Shield cable (AWG24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
Protection structure			IP50 (IEC standard)
Approval			CE
Unit weight			Approx. 494g

※1: Make sure that max. response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.
[Max. response revolution (rpm)= (Max. response frequency/Resolution) × 60 sec]

※Environment resistance is rated at no freezing or condensation.

Kích Thước Sản Phẩm

 

[/ux_text]