Encoder E50S8-2048-6-L-5 Autonics xuất xứ Hàn Quốc, bảo hành 12 tháng, hàng chính hãng
Thông Tin Sản Phẩm
| Tên sản phẩm | Encoder trục lồi phi 8 (tương đối) |
| Mã sản phẩm | E50S8-2048-6-L-5 |
| Đường kính thân | Ø50mm |
| Đường kính trục | Ø8mm |
| Độ phân giải | 2048 xung/vòng |
| Pha ngõ ra | A, A\, B, B\, Z, Z\ |
| Ngõ ra điều khiển | Line driver output |
| Nguồn cấp | 5VDC±5% |
Cách chọn Encoder
Thông Số Kỹ Thuật
| Item | Shaft Type Ø50mm Incremental Rotary Encoder | ||
| Resolution (PPR)※1 | *1, *2 ,*5, 10, 12, 15, 20, 23, 25, 30, 35, 40, 45, 50, 60, 75, 100, 120, 125, 150, 192, 200, 240, 250, 256, 300, 360, 400, 500, 512, 600, 800, 1000, 1024, 1200, 1500, 1800, 2000, 2048, 2500, 3000, 3600, 4000, 5000, 6000, 8000 |
||
| specification
|
Output phase | A, B, Z phase (line driver: A, A_, B, B_, Z, Z_ phase) | |
| Phase difference of output | Output between A and B phase: _T4 ± T _8 (T=1 cycle of A phase) | ||
| Control output |
Totem pole output | • [Low] – Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ • [High] – Load current: max. 10mA, output voltage (power voltage 5VDCᜡ): min. (power voltage-2.0)VDCᜡ, output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ |
|
| NPN open collector output | Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ | ||
| Voltage output | Load current: max. 10mA, residual voltage: max. 0.4VDCᜡ | ||
| Line driver output | • [Low] – Load current: max. 20mA, residual voltage: max. 0.5VDCᜡ • [High] – Load current: max. -20mA, Output voltage (power voltage 5VDCᜡ): min.2.5VDCᜡ, Output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ |
||
| Response time (rise/fall) |
Totem pole output | Max. 1㎲ (cable length: 2m, I sink = 20mA) | |
| NPN open collector output | |||
| Voltage output | |||
| Line driver output | Max. 0.5㎲ (cable length: 2m, I sink = 20mA) | ||
| Max. response frequency | 300kHz | ||
| Power supply | • 5VDCᜡ ±5% (ripple P-P: max. 5%) • 12-24VDCᜡ ±5% (ripple P-P: max. 5%) | ||
| Current consumption | Max. 80mA (disconnection of the load), Line driver output: max. 50mA (disconnection of the load) | ||
| Insulation resistance | Over 100MΩ (at 500VDC megger between all terminals and case) | ||
| Dielectric strength | 750VAC 50/60Hz for 1 minute (between all terminals and case) | ||
| Connection | Axial cable type, Axial cable connector type, Axial/Radial connector type | ||
| Starting torque | Max. 70gf·cm (0.007N·m)※2, max. 800gf·cm (0.078N·m)※3 | ||
| Moment of inertia | Max. 80g·cm2 (8×10-6 kg·m2)※2, max. 400g·cm2 (4×10-5 kg·m2)※3 | ||
| Shaft loading | Radial: max. 10kgf, Thrust: max. 2.5kgf | ||
| Max. allowable revolution※2 | 5,000rpm | ||
| Vibration | 1.5mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours | ||
| Shock | Approx. max. 75G | ||
| Environment | Ambient temperature | -10 to 70℃, storage: -25 to 85℃ | |
| Ambient humidity | 35 to 85%RH, storage: 35 to 90%RH | ||
| Protection structure | Axial cable type, Axial cable connector type: IP50 (IEC standard)※5, Axial/Radial connector type: IP65 (IEC standard) |
||
| Cable | Ø5mm, 5-wire (line driver output: 8-wire), 2m, Shield cable (AWG 24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm) |
||
| Accessory | Ø8mm coupling, bracket | ||
| Approval | (except for line driver output) | ||
| Weight※6 | Approx. 363g (approx. 275g), Axial/Radial connector type: approx. 268g (approx. 180g) | ||
※1: ‘*’ pulse is only for A, B phase (line driver output is for A, A_, B, B_ phase). Not indicated resolutions are customizable.
※2: This value is for Axial cable type, Axial cable connector type (protection structure: IP50).
※3: This value is for Axial cable type, Axial cable connector type (protection structure: IP64),
Axial/Radial connector type (protection structure: IP65).
※4: Make sure that max. response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.
【Max. response resolution (rpm) = (Max. response frequency/Resolution) × 60 sec 】
※5: In case of axial cable type, axial cable connector type, they are available to order the option protection structure IP64.
※6: The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.
Kích Thước Sản Phẩm
Hãy là người đầu tiên nhận xét “E50S8-2048-6-L-5”
Sản phẩm tương tự
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
1 đánh giá cho E50S8-2048-6-L-5
Chưa có đánh giá nào.