Encoder E40S6-2048-3-N-24 Autonics xuất xứ Hàn Quốc, bảo hành 12 tháng, hàng chính hãng
Thông Tin Sản Phẩm
Tên sản phẩm | Encoder trục lồi phi 6 (tương đối) |
Mã sản phẩm | E40S6-2048-3-N-24 |
Đường kính thân | Ø40mm |
Đường kính trục | Ø6mm |
Độ phân giải | 2048 xung/vòng |
Pha ngõ ra | A, B, Z |
Ngõ ra điều khiển | NPN open collector output |
Nguồn cấp | 12-24VDC±5% |
Cách chọn Encoder
Thông Số Kỹ Thuật
Item | Shaft Type/Hollow Shaft Type/Blind Hollow Shaft Type Ø40mm Incremental Rotary Encoder | ||
Resolution (PPR)※1 | * 250, 256, 300, 360, 400, 500, 512, 600, 800, 1000, 1024, 1200, 1500, 1800, 2000, 2048, 1, *2 ,*5, 10, *12, 15, 20, 23, 25, 30, 35, 40, 45, 50, 60, 75, 100, 120, 150, 192, 200, 240, 2500, 3000, 3600, 5000 |
||
Electrical specification
|
Output phase | A, B, Z phase (line driver A, A_B, B_, Z, Z_phase) | |
Phase difference of output | Phase difference between A and B: T _4 ± T _8 (T=1 cycle of A phase) | ||
Control output |
Totem pole output | • [Low] – Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ • [High] – Load current: max. 10mA, output voltage (power voltage 5VDCᜡ): min. (power voltage-2.0)VDCᜡ, Output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ |
|
NPN open collector output | Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ | ||
Voltage output | Load current: max. 10mA, residual voltage: max. 0.4VDCᜡ | ||
Line driver output | • [Low] – Load current: max. 20mA, residual voltage: max. 0.5VDCᜡ • [High] – Load current: max. -20mA, output voltage (power voltage 5VDCᜡ): min. 2.5VDCᜡ, Output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ |
||
Response time (rise/fall) |
Totem pole output | Max. 1㎲ (cable length: 2m, I sink = 20mA) | |
NPN open collector output | Max. 0.5㎲ (cable length: 2m, I sink = 20mA) | ||
Voltage output | Shaft Type/Hollow Shaft Type/Blind Hollow Shaft Type Ø40mm Incremental Rotary Encoder | ||
Line driver output | * 250, 256, 300, 360, 400, 500, 512, 600, 800, 1000, 1024, 1200, 1500, 1800, 2000, 2048, 1, *2 ,*5, 10, *12, 15, 20, 23, 25, 30, 35, 40, 45, 50, 60, 75, 100, 120, 150, 192, 200, 240, 2500, 3000, 3600, 5000 |
||
Max. response frequency | 300kHz | ||
Power supply | • 5VDCᜡ ±5% (ripple P-P: max. 5%) • 12-24VDCᜡ ±5% (ripple P-P: max. 5%) | ||
Current consumption | Max. 80mA (disconnection of the load), line driver output: max. 50mA (disconnection of the load) | ||
Insulation resistance | Over 100MΩ (at 500VDC megger between all terminals and case) | ||
Dielectric strength | 750VAC 50/60Hz for 1 minute (between all terminals and case) | ||
Connection | Radial cable type, Radial cable connector type | ||
Mechanical
Specification |
Starting torque | • S type: max. 40gf·cm (0.004N·m) • H/HB type: max. 50gf·cm (0.005N·m) | |
Moment of inertia | Max. 40g·cm2 (4×10-6 kg·m2) | ||
Shaft loading | Radial: max. 2kgf, Thrust: max. 1kgf | ||
Max. allowable revolution※2 | 5,000rpm | ||
Vibration | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | ||
Shock | Approx. max. 50G | ||
Environment | Ambient temperature | -10 to 70℃, storage: -25 to 85℃ | |
Ambient humidity | 35 to 85%RH, storage: 35 to 90%RH | ||
Protection structure | IP50 (IEC standard) | ||
Cable | Ø5mm, 5-wire (line driver output: 8-wire), 2m, Shield cable (AWG24, core diameter: 0.08, number of cores: 40, insulator out diameter: Ø1mm) |
||
Accessory | • S type: Ø6mm coupling, Ø8mm coupling • H/HB type: bracket | ||
Approval | CE (except line driver output) |
※1: ‘*’ pulse is only for A, B phase (line driver output is for A, A_, B, B_ phase). Not indicated resolutions are customizable.
※2: Make sure that max. response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.
Max. response revolution (rpm)= (Max. response frequency/ Resolution) × 60 sec
※Environment resistance is rated at no freezing or condensation.
Kích Thước Sản Phẩm
[/ux_text]
1 đánh giá cho E40S6-2048-3-N-24
Chưa có đánh giá nào.