E40H8-3000-3-T-24

Encoder Autonics E40H8-3000-3-T-24, hàng chính hãng, bảo hành 12 tháng

Thông Tin Sản Phẩm

Tên sản phẩm	Encoder trục lõm phi 8(tương đối)
Mã sản phẩm	E40H8-3000-3-T-24
Đường kính thân	Ø40mm
Đường kính trục	Ø8mm
Độ phân giải	3000 xung/vòng
Pha ngõ ra	A, B, Z
Ngõ ra điều khiển	Totem pole
Nguồn cấp	12-24VDC±5%

Cách chọn Encoder

Thông Số Kỹ Thuật

Item			Shaft Type/Hollow Shaft Type/Blind Hollow Shaft Type Ø40mm Incremental Rotary Encoder
Resolution (PPR)※1			* 250, 256, 300, 360, 400, 500, 512, 600, 800, 1000, 1024, 1200, 1500, 1800, 2000, 2048, 1, *2 ,*5, 10, *12, 15, 20, 23, 25, 30, 35, 40, 45, 50, 60, 75, 100, 120, 150, 192, 200, 240, 2500, 3000, 3600, 5000
Electrical specification	Output phase		A, B, Z phase (line driver A, A_B, B_, Z, Z_phase)
	Phase difference of output		Phase difference between A and B: T _4 ± T _8 (T=1 cycle of A phase)
	Control output	Totem pole output	• [Low] – Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ • [High] – Load current: max. 10mA, output voltage (power voltage 5VDCᜡ): min. (power voltage-2.0)VDCᜡ, Output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ
		NPN open collector output	Load current: max. 30mA, residual voltage: max. 0.4VDCᜡ
		Voltage output	Load current: max. 10mA, residual voltage: max. 0.4VDCᜡ
		Line driver output	• [Low] – Load current: max. 20mA, residual voltage: max. 0.5VDCᜡ • [High] – Load current: max. -20mA, output voltage (power voltage 5VDCᜡ): min. 2.5VDCᜡ, Output voltage (power voltage 12-24VDCᜡ): min. (power voltage-3.0)VDCᜡ
	Response time (rise/fall)	Totem pole output	Max. 1㎲ (cable length: 2m, I sink = 20mA)
		NPN open collector output	Max. 0.5㎲ (cable length: 2m, I sink = 20mA)
		Voltage output	Shaft Type/Hollow Shaft Type/Blind Hollow Shaft Type Ø40mm Incremental Rotary Encoder
		Line driver output	* 250, 256, 300, 360, 400, 500, 512, 600, 800, 1000, 1024, 1200, 1500, 1800, 2000, 2048, 1, *2 ,*5, 10, *12, 15, 20, 23, 25, 30, 35, 40, 45, 50, 60, 75, 100, 120, 150, 192, 200, 240, 2500, 3000, 3600, 5000
	Max. response frequency		300kHz
	Power supply		• 5VDCᜡ ±5% (ripple P-P: max. 5%) • 12-24VDCᜡ ±5% (ripple P-P: max. 5%)
	Current consumption		Max. 80mA (disconnection of the load), line driver output: max. 50mA (disconnection of the load)
	Insulation resistance		Over 100MΩ (at 500VDC megger between all terminals and case)
	Dielectric strength		750VAC 50/60Hz for 1 minute (between all terminals and case)
	Connection		Radial cable type, Radial cable connector type
Mechanical Specification	Starting torque		• S type: max. 40gf·cm (0.004N·m) • H/HB type: max. 50gf·cm (0.005N·m)
	Moment of inertia		Max. 40g·cm2 (4×10-6 kg·m2)
	Shaft loading		Radial: max. 2kgf, Thrust: max. 1kgf
	Max. allowable revolution※2		5,000rpm
Vibration			1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Shock			Approx. max. 50G
Environment		Ambient temperature	-10 to 70℃, storage: -25 to 85℃
		Ambient humidity	35 to 85%RH, storage: 35 to 90%RH
Protection structure			IP50 (IEC standard)
Cable			Ø5mm, 5-wire (line driver output: 8-wire), 2m, Shield cable (AWG24, core diameter: 0.08, number of cores: 40, insulator out diameter: Ø1mm)
Accessory			• S type: Ø6mm coupling, Ø8mm coupling • H/HB type: bracket
Approval			CE (except line driver output)

※1: ‘*’ pulse is only for A, B phase (line driver output is for A, A_, B, B_ phase). Not indicated resolutions are customizable.
※2: Make sure that max. response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.
 Max. response revolution (rpm)= (Max. response frequency/ Resolution) × 60 sec
※Environment resistance is rated at no freezing or condensation.

Kích Thước Sản Phẩm

 

[/ux_text]